SENSORMETRICS BOATNANNY

BOAT ALARM COMPLETE PACKAGE INCLUDES:

• BoatNanny™ Base Station
• BoatNanny™ Remote Sensor w/Float Switch
• BoatNanny™ Users Guide
• Easy Command Card
• AC Power Adapter
• DC Power Cable
• Cell Phone Antenna
• Remote Sensor Mounting Hardware
• 2 AA alkaline batteries for the Remote Unit
• 4 AA nickel cadmium batteries for the Base Unit

POWER

• Base Unit is powered by 120VAC or the ship's 12-24 Volts DC systems with built-in rechargeable battery back-up.
• Remote Unit is powered by 2 AA alkaline batteries (guaranteed for 1 year).
• BoatNanny™ consumes little power(50mA) and can be used on small vessels on moorings or at slips with no AC power.

INSTALLATION/PROGRAMMING

• Easy to program, just send a command text message to the BoatNanny™ and it will text or email you if alarm is tripped.
• Can program up to three different contacts if alarm is activated.
• Daily status reports on all boat parameters are sent by text message to your cell phone.

FEES

• No monthly monitoring fees.
• Simply buy a phone card from a GSM cellular carrier such as Cingular or T-Mobile.
• The cost of operation is just $0.05/text message. Average plan is $100/year.

NOTE: For your convenience, The BoatNanny™ staff has install a SIM card. Service is offered T-Mobile just log on to the website listed on the unit and register the service. Just text up to three cell phone numbers yo want to have alert sent to and your done

THE SENSORS:

The BoatNanny™ comes standard with one Base Unit and one Remote Unit. Each unit has its own sensors and can be accessed by your cell phone. Below is a list of the sensors, what their function are and where they are located.

Base Unit:

Temperature Sensor - The temperature sensor monitors the temperature in the boat cabin. You can set the low and high temperature thresholds. If the temperature goes above or below the threshold, you will be notified. For example, if the heat in the boat fails and the temperature falls below the threshold, an alarm message will be sent.

Motion Sensor - The motion sensor points toward the entrance of the cabin. If someone were to enter the boat, it would trip the motion sensor and notify the customer. The motion sensor selected is a highly accurate sensor that activates only when someone enters the detection zone. It is not activated by the boat rocking, or from curtains moving, etc.

AC/DC loss of power - The BoatNanny™ sends an alarm message to the customer if there is a loss of either AC or DC power. For instance, if your ship-to-shore power becomes unplugged, or if your 12V battery becomes discharged, the BoatNanny™ will alert you.

Smoke Detector - The BoatNanny™ monitors existing smoke/fire alarm and sends an alarm message when smoke or fire is in cabin.

Audio Microphone - Simply call The BoatNanny™ and you can listen-in to the activities and audio levels within the cabin.

Remote Unit:

Temperature Sensor - The temperature sensor in the Remote Unit monitors the temperature in the engine room. This also has a high and low threshold. Overheating of the engine or icing of water in the engine room are examples of when the BoatNanny™ would alert you.

Bilge Water height -- The Remote Unit can be connected to a wide variety of float switches or water sensors. As soon as water either trips the float switch or water rises to the water sensor, the BoatNanny™ will alert the customer that there is water entering the boat.

Additional Details